Cisco 15310-MA Instrukcja Naprawy Strona 355

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 354
4-47
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, Release 9.0
78-18394-01
Chapter 4 Error Messages
EID-6108 That port is already in use. Restart a TELNET session.
EID-6109 A section trace is active on the trunk port. The action cannot be
completed.
Actions such as putting the port in an
incomplete state are not permitted while a
section trace is active.
EID-6110 The maximum number of TARP requests has been reached. You have exceeded the maximum number
of TARP requests.
EID-6111 The card in Slot {0} cannot be removed from the protection
group while its traffic is switched.
Refer to the error message text.
EID-6112 An error occurred while adding a shelf: {0} The shelf ID specified is invalid or already
exists, the equipment does not support
multishelf, the specified shelf position is
out of range, or the specified shelf position
is already in use.
EID-6113 An error occurred while deleting a shelf: {0} One or more of the equipment modules
(provisioned virtual links, provisioned
server trails, provisioned protection groups,
or provisioned DCCs) in the shelf is
currently in use. Delete cards from all the
slots and try again.
EID-6114 The maximum number of supported shelves has already been
provisioned.
Refer to the error message text.
EID-6115 There are bad or duplicate shelf positions.
Valid rack numbers are {0} to {1}.
Valid rack positions are {2} to {3}.
Refer to the error message text.
EID-6116 CTC attempted to access an OCH-Trail connection that has
been destroyed.
Software has prevented an attempt to access
an OCH trail.
EID-6117 CTC attempted to access an OCH-Trail edit that has been
destroyed.
The resource cannot be accessed because it
is released or fully utilized.
WID-6118 The following slots are provisioned but do not have cards
installed:
{0}
CTC will assume they are ITU-T interfaces.
Refer to the warning message text.
EID-6119 The shelves could not be rearranged.
{0}
One of the following conditions is present:
duplicate shelf positions, invalid shelf
positions, or concurrent movement (two
CTC sessions are attempting to rearrange
the shelves at the same time.)
EID-6120 This equipment does not support multishelf. Refer to the error message text.
WID-6121 This internal patchcord cannot be provisioned because the
endpoints have no compatible wavelengths.
The end points of an internal patchcord
should have compatible wavelengths.
EID-6122 The wizard could not be started.
{0}
CTC was unable to initiate the wizard due
to the specified reason.
EID-6123 The OSI request can not be completed successfully. A communication failure occurred.
Table 4-1 Error Messages (continued)
Error/Warning
ID Error/Warning Message Description
Przeglądanie stron 354
1 2 ... 350 351 352 353 354 355 356 357 358 359 360 ... 379 380

Komentarze do niniejszej Instrukcji

Brak uwag