Cisco NM-16ESW - EtherSwitch Switch Instrukcja Użytkownika Strona 72

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 90
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 71
Configuring the Cisco Gigabit EtherSwitch EHWIC
How to Configure Gigabit EtherSwitch EHWICs
72
Configuring the Cisco Gigabit EtherSwitch EHWIC
OL-23155-01
Enabling the DNS
If your network devices require connectivity with devices in networks for which you do not control name
assignment, you can assign device names that uniquely identify your devices within the entire
internetwork. The Internet global naming scheme, the DNS, accomplishes this task. This service is
enabled by default.
Enabling Switch Port Analyzer
You can monitor traffic on a given port by forwarding incoming and outgoing traffic on the port to
another port in the same VLAN. A Switch Port Analyzer (SPAN) port cannot monitor ports in a different
VLAN, and a SPAN port must be a static-access port. Any number of ports can be defined as SPAN ports,
and any combination of ports can be monitored. SPAN is supported for up to two sessions.
Beginning in privileged EXEC mode, follow these steps to enable SPAN.
SUMMARY STEPS
1. configure terminal
2. monitor session session-id {destination | source} {interface type 0/slot/port | vlan vlan-id} [, | - |
both | tx | rx]
3. end
DETAILED STEPS
Use the no monitor session session-id command in global configuration mode to disable SPAN.
Command Purpose
Step 1
configure terminal
Example:
Router#configure terminal
Enters global configuration mode.
Step 2
monitor session session-id {destination | source}
{interface type 0/slot/port | vlan vlan-id} [, | - | both | tx |
rx]
Example:
Router(config)#monitor session 1 destination
interface gigabitethernet 0/1/2
Enables port monitoring for a specific session
(“number”). (Optional) Supply a SPAN destination
interface or source interface.
Step 3
end
Example:
Router(config)#end
Returns to privileged EXEC mode.
Przeglądanie stron 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 89 90

Komentarze do niniejszej Instrukcji

Brak uwag