Cisco NM-16ESW - EtherSwitch Switch Instrukcja Użytkownika Pobierz pdf (Strona 41)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

Configuring Maximum Inline Power Supply to a Port

The default power limit per port is 20 watts. Use the power inline port max max-wattage command to

configure the maximum inline power supply to a port the EHWIC.

Beginning in privileged EXEC mode, follow these steps to configure the maximum inline power for a

port on the EHWIC:

SUMMARY STEPS

1. configure terminal

2. interface gigabitethernet 0/slot/port

3. power inline port max max-wattage

DETAILED STEPS

Verifying Power Management on the Interface

Use the show power inline command to verify the power configuration on the ports.

Router#show power inline

PowerSupply SlotNum. Maximum Allocated Status

----------- -------- ------- --------- ------

INT-PS 0 200.000 32.100 PS GOOD RPS ABSENT

Interface Config Device Powered PowerAllocated State

--------- ------ ------ ------- -------------- -----

Gi0/1/3 auto Cisco On 6.300 Watts PHONE

Gi0/1/2 auto Unknown Off 0.000 Watts NOT_PHONE

Gi0/1/1 auto Unknown Off 0.000 Watts UNKNOWN

Gi0/1/0 auto IEEE-3 On 12.900 Watts PHONE

Gi0/3/7 auto Unknown Off 0.000 Watts NOT_PHONE

Gi0/3/6 auto IEEE-3 On 12.900 Watts PHONE

Command Purpose

Step 1

configure terminal

Example:

Router#configure terminal

Enters global configuration mode.

Step 2

interface gigabitethernet 0/slot/port

Example:

Router(config)#interface gigabitethernet 0/1/3

Selects a particular GigabitEthernet interface for

configuration.

Step 3

power inline port max max-wattage

Example:

Router(config-if)#power inline port max 6300

Sets the maximum power to a device connected to the

EHWIC port.

The maximum power can be set between 4,000 and 20,000

milliwatts.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 89 90

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco NM-16ESW - EtherSwitch Switch Instrukcja Użytkownika Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cisco NM-16ESW - EtherSwitch Switch