Cisco NM-16ESW - EtherSwitch Switch Instrukcja Użytkownika Strona 51

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 90
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 50
Configuring the Cisco Gigabit EtherSwitch EHWIC
How to Configure Gigabit EtherSwitch EHWICs
51
Configuring the Cisco Gigabit EtherSwitch EHWIC
OL-23155-01
4. storm-control action shutdown
5. end
6. show storm-control [interface-type interface-number] [broadcast | multicast | unicast | history]
DETAILED STEPS
Note If any type of traffic exceeds the upper threshold limit, all of the other types of traffic are stopped.
Command Purpose
Step 1
configure terminal
Example:
Router#configure terminal
Enters global configuration mode.
Step 2
interface type 0/slot/port
Example:
Router(config)#interface
gigabitethernet 0/1/2
Enters interface configuration mode, and enter the port to configure.
Step 3
storm-control {broadcast | multicast |
unicast} level level-high [level-low]
Example:
Router(config-if)#storm-control
{broadcast | multicast | unicast} level
level-high [level-low]
Configures broadcast, multicast, or unicast per-port storm-control.
Specify the rising threshold level for either broadcast, multicast, or
unicast traffic. The storm control action occurs when traffic
utilization reaches this level.
(Optional) Specify the falling threshold level. The normal
transmission restarts (if the action is filtering) when traffic drops
below this level.
Step 4
storm-control action shutdown
Example:
Router(config-if)#storm-control action
shutdown
Selects the shutdown keyword to disable the port during a storm.
The default is to filter out the traffic.
Step 5
end
Example:
Router(config-if)#end
Returns to privileged EXEC mode.
Step 6
show storm-control [interface-type
interface-number] [broadcast | multicast |
unicast | history]
Example:
Router#show storm-control
gigabitethernet 0/1/2 history
Verifies your entries.
Przeglądanie stron 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 89 90

Komentarze do niniejszej Instrukcji

Brak uwag