Cisco NM-16ESW - EtherSwitch Switch Instrukcja Użytkownika Pobierz pdf (Strona 64)

Configuring the Cisco Gigabit EtherSwitch EHWIC

How to Configure Gigabit EtherSwitch EHWICs

Configuring the Cisco Gigabit EtherSwitch EHWIC

OL-23155-01

DETAILED STEPS

To reenable spanning tree on the interface, use the no bridge-group bridge-group spanning-disabled

command in interface configuration mode.

Monitoring and Maintaining the Network

To monitor and maintain the network, use one or more of the following commands in privileged EXEC

mode.

Command Purpose

Step 1

configure terminal

Example:

Router#configure terminal

Enters global configuration mode.

Step 2

interface type 0/slot/port

Example:

Router(config)#interface

gigabitethernet 0/1/2

Enters interface configuration mode, and specifies the interface ID.

Step 3

bridge-group bridge-group

spanning-disabled

Example:

Router(config-if)#bridge-group 1

spanning-disabled

Disables spanning tree on the interface.

For bridge-group, specify the bridge group number. The range is from

1 to 255.

Step 4

end

Example:

Router(config-if)#end

Returns to privileged EXEC mode.

Command Purpose

clear bridge bridge-group Removes any learned entries from the forwarding

database and clears the transmit and receive

counts for any statically configured entries.

show bridge [bridge-group] [interface] [address]

[group] [verbose]

Displays classes of entries in the bridge

forwarding database.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 89 90

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco NM-16ESW - EtherSwitch Switch Instrukcja Użytkownika Strona 64

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cisco NM-16ESW - EtherSwitch Switch