Cisco TANDBERG?150MXP Instrukcja Użytkownika Pobierz pdf (Strona 6)

TANDBERG TANDBERG and Cisco CallManager

D13907.01

3.1 Requirements

The TANDBERG endpoints listed previously can be easily integrated with Cisco CallManager software

versions 4.0 and later. Additionally, the TANDBERG Video Endpoint software plug-in must be installed

on the CallManager servers.

3.2 Install the TANDBERG CallManager Plug-in on the CallManager

server

1. Download "TANDBERG_CallManager_Plugin.exe" from

http://ftp.tandberg.net/pub/software/endpoints/cisco_call_manager_series

2. Run the plug-in on the Call Manager server

3. Follow the on-screen instructions

Note: It is not necessary to reboot the server after the installation

3.3 Configuring the TANDBERG video unit for registration to the

CallManager

The TANDBERG video endpoints for CallManager supports DHCP and option 150, meaning your DHCP

server can provide the unit with the IP address of the CallManagers TFTP server in addition to the DNS

server IP address, the units IP address, subnet mask and default router.

1. Connect Ethernet to your TANDBERG video endpoint for Callmanager and then power on the

unit

2. Enter the network settings menu

3. Choose IP-assignment: DHCP/static (boot to take effect)

If IP-assignment = DHCP:

If the DHCP server provides the CCM TFTP address in the "TFTP-SERVER-NAME" option, you

should be up and running.

You can also provide the CCM TFTP address yourself by choosing "Alternate TFTP Server" YES,

and typing in the TFTP address in the TFTP configuration menu.

If IP-assignment = static:

1. Enter preferred IP-address

2. Enter the correct subnet mask and default router

3. Enter the CCM TFTP address in the TFTP configuration menu

4. Enter the Domain Name and DNS address(es) in the DNS configuration menu*

5. Boot your TANDBERG endpoint to have the changes take effect

6. The TANDBERG endpoint should now register with the Call Manager

For more information on the Network configuration see the Network settings in the TANDBERG endpoint

user manual.

Note: The TANDBERG SCCP endpoint has to be configured with a DNS server IP address. If there is no

DNS server present in the network, configure the TANDBERG endpoint with a fictitious DNS IP address.

1 2 3 4 5 6 7 8 9 10 11 ... 45 46

Brak uwag

Cisco TANDBERG?150MXP Instrukcja Użytkownika Strona 6