Cisco TANDBERG?150MXP Instrukcja Użytkownika Pobierz pdf (Strona 5)

TANDBERG TANDBERG and Cisco CallManager

D13907.01

To provide the users with the familiar interface the TANDBERG endpoints for Cisco CallManager has a

graphical interface and remote control that is specifically designed to match the Cisco IP phones user

interface. Figure 3 shows and example of an screen shot from the TANDBERG MXP unit; please note the

existence of the ‘soft buttons’ at the bottom of the screen that allow the system to provide the advanced

functionality of Cisco CallManager. These buttons are then activated by pressing the corresponding ‘quick

keys’ at the top of the TANDBERG remote control 2, as demonstrated in Figures 3 and 4 below

Figure 3: Screenshot from TANDBERG MXP Figure 4: TANDBERG remote control

The user interface on the Classic endpoints has three soft buttons with the colors green, yellow and blue in

the bottom of the screen. These soft buttons can be activated by pressing the colored quick keys at the top

of the TANDBERG remote control, as demonstrated in figure 5.

Figure 5: Screen and remote control of a Classic endpoint for CallManager

1 2 3 4 5 6 7 8 9 10 ... 45 46

Brak uwag

Cisco TANDBERG?150MXP Instrukcja Użytkownika Strona 5