Cisco Digital Video Recorder in Stand-Alone Mode Instrukcja Użytkownika Strona 31

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 140
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 30
31 DGVox 8 Management Console Configuration Guide
Chapter 1 - Management Console
Confidential and Proprietary Information of Vox Spectrum. Ltd.
TAB LE 15: AN AL OG REC ORD ER - CHA NNE L SE TT IN GS
Field
Description
Selection Mode
Select the appropriate selection mode. The channel
settings can be applied to all or individual channels.
The options are Apply to All and Individual.
Select Channel
Select the channel ID from the drop-down list to which
the channel settings is to be applied. The option is
available only when the individual selection mode is
activated.
Automatic Gain Control
Select the check box to activate automatic gain control.
This is the automatic gain control value.
Fax
Select the check box to activate Fax. You can assign
channels for fax recording, by selecting the desired
channel ID from the Select Channel option.
Gain
Type the audio gain required. If the voltage reaches less
than this value, the recording will be on. If it is equal to
or greater than this value, the recording will be off.
Voltage
Type the threshold voltage on the telephone channel.
Bargein
Type the bargein value. This determines the sensitivity of
the voice. This is considered when the channel is
operating in silent mode.
Control
Select the appropriate control option from the drop-down
list.
It can be used for voltage or silence. The voltage
mode checks for threshold voltage to trigger recording. In
the silence mode, the recording is triggered if there is
voice and stopped if there is silence.
Minimum Voice Energy
Select the minimum voice energy for voice calls to get
recorded.
Storage
Select the file type, in which the recorded files are to be
saved, from the drop-down list.
The options are: WAV and MP3 formats.
Przeglądanie stron 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 139 140

Komentarze do niniejszej Instrukcji

Brak uwag