Cisco Digital Video Recorder in Stand-Alone Mode Instrukcja Użytkownika Strona 114

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 140
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 113
114 DGVox 8 Management Console Configuration Guide
Chapter 1 - Management Console
Confidential and Proprietary Information of Vox Spectrum. Ltd.
Field
Description
Caller ID
Select the proper Caller ID from the drop-down
list depending on line type.
Vox Sensitivity
This option is used to balance the threshold of
voice signal. The vox sensitivity can be
increased to detect a weak signal.
Disconnection Freq.
If the frequency level of a call is below the level
of given frequency level in this field; the call is
automatically disconnected.
Ring Frequency
This option helps you to set the number of
rings in a particular interval.
Ring Interval
This option helps you to set the gap between
two rings
Ethernet
Check the option button to access the voice
logger device via Ethernet. If Ethernet option is
not selected, then the USB interface will be
enabled.
USB
Check the option button to Enable USB access
to the voice logging device. If USB option is
selected, then all network parameters will get
inactive.
DHCP Enable
Check the corresponding box to enable
dynamic IP for Ethernet interface. If DHCP
enable is selected, then the Static IP, Gateway,
DNS and Subnet Mask fields will become
inactive.
Static IP
Enter the Static IP for the voice logger.
Configured IP will be used for connecting to the
network, when DHCP is disabled.
Gateway
Enter the Gateway IP to be configured address
for the voice logger.
DNS
Enter the DNS to be configured for the voice
logger.
Subnet Mask
Enter the Subnet Mask to be configured for the
voice logger.
Przeglądanie stron 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 139 140

Komentarze do niniejszej Instrukcji

Brak uwag