Cisco UCS C460 Instrukcja Użytkownika Pobierz pdf (Strona 21)

Cisco UCS C460 M2 High-Performance Rack-Mount Server

CONFIGURING the SERVER

Approved Configurations

(1) One RAID Controller Card

■ Choose either the RC460-PL001 LSI MegaRAID SAS 9260-8i RAID controller or the

RC460-PL002 LSI MegaRAID SAS 9240-8i RAID controller listed in

Table 7. You will be able to

control from 1 to 12 drives with the 9260-8i RAID controller and from 1 to 8 drives with the

9240-8i RAID controller.

Caveats

■ The RAID controller card is preinstalled in a dedicated SAS riser slot in the rear of the server.

See

Figure 4 on page 6.

■ You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is

pre-configured at the factory. If you do not choose a RAID configuration, the disks will be

configured as a JBOD.

R2XX-RAID5 Factory pre-configured RAID option

Enable RAID 5 Setting. Requires minimum 3 drives of same size, speed, capacity.

R2XX-RAID6 Factory pre-configured RAID option

Enable RAID 6 Setting. Requires minimum 4 drives of same size, speed, capacity.

R2XX-RAID10 Factory pre-configured RAID option

Enable RAID 10 Setting. Requires an even number of drives (minimum 4 drives) of

same size, speed, capacity.

NOTE: No RAID option can be chosen if you have one of the following configurations:

• A mix of SAS and SATA drives

•No drives

Table 7 Available RAID Options (continued)

Product ID (PID) PID Description

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

Brak uwag

Cisco UCS C460 Instrukcja Użytkownika Strona 21