Cisco Network Analysis Module 6000 Dokumentacja Pobierz pdf (Strona 300)

System Admin 4-24

NAM / Traffic Analyzer v3.5 Tutorial

Sys tem Admin 4-24

NAM / Traffic Analyzer v3.5 Tutorial

NM-NAM Administration

Initial Configuration – SNMP Configuration (Optional)

NM-NAM Administration

Initial Configuration – SNMP Configuration (Optional)

If you want to use an external network management application to

communicate with NAM, first enable SNMP attributes:

• SNMP MIB variables (sysLocation, sysContact, sysName)

• Community strings (read-only, read-write)

• Can be done from CLI or via NAM web interface

If you want to use an external network management application to

communicate with NAM, first enable SNMP attributes:

• SNMP MIB variables (sysLocation, sysContact, sysName)

• Community strings (read-only, read-write)

• Can be done from CLI or via NAM web interface

SNMP Get / Set

NAM

SNMP Response

Configuring Initial Setup (NM-NAM) – SNMP Configuration

The data collected and stored in the NAM can also be accessed using other SNMP management. Before

retrieving any data from the NAM or setting any parameters on it, you must configure the NAM SNMP agent

with community strings. Then you must also configure the monitoring application to use the same strings as

you configured for the NAM in order to retrieve any data.

The SNMP parameters can be set via the NAM CLI or through the NAM web interface.

The community strings set for the NAM SNMP agent must be the same as the community strings of the host

switch. For example,

[email protected]# snmp community community-string rw

[email protected]# snmp community community-string ro

The NM-NAM is now configured and ready to use for traffic monitoring!

1 2 ... 295 296 297 298 299 300 301 302 303 304 305 ... 319 320

Brak uwag

Cisco Network Analysis Module 6000 Dokumentacja Strona 300