Cisco Network Analysis Module 6000 Dokumentacja Pobierz pdf (Strona 156)

Product Features 2-114

NAM / Traffic Analyzer v3.5 Tutorial

Product Features 2-114

NAM / Traffic Analyzer v3.5 Tutorial

Configuring Alarms

Voice Alarms

Configuring Alarms

Voice Alarms

Choose the jitter and

packet-loss threshold for

any or all (SCCP, H.323,

MGCP, and SIP)

Choose the jitter and

packet-loss threshold for

any or all (SCCP, H.323,

MGCP, and SIP)

Enable voice monitoring first, using

Setup > Monitor > Voice Monitoring,

before you can receive voice alarms

using these defined thresholds

Enable voice monitoring first, using

Setup > Monitor > Voice Monitoring,

before you can receive voice alarms

using these defined thresholds

Configuring Voice Threshold Alarms

Configuring voice alarms is a simple process with the NAM.

First, choose which voice protocol you want to alarm on. Select either: SCCP, H.323, SIP, or MGCP.

For each protocol selected, set your jitter and packet loss threshold. Remember that jitter is measured in

milliseconds and packet-loss is measured as a percentage of all packets. When these defined thresholds are

crossed, events will be generated by the NAM and reported in the Traffic Analyzer under the Alarms tab.

Remember that voice monitoring must be enabled via Setup > Monitoring > Voice Monitoring before you

can generate voice alarms.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 319 320

Brak uwag

Cisco Network Analysis Module 6000 Dokumentacja Strona 156