Cisco OSM-12CT3/T1 - Optical Services Module Multiplexor Przewodnik Instalacji Pobierz pdf (Strona 9)

1-9

Cisco 7600 Series Internet Router Module Installation Guide

78-12798-07

Chapter 1 Product Overview

Supervisor Engines

Table 1-3 Supervisor Engines 1A and 2 LEDs

LED Color Description

STATUS

Orange The module is booting or running diagnostics (normal initialization

sequence).

An overtemperature condition has occurred. (A minor threshold has

been exceeded during environmental monitoring.)

Green All diagnostics pass; the module is operational (normal initialization

sequence).

Red Diagnostic test failed; the module is not operational. (The fault occurred

during the initialization sequence.)

An overtemperature condition has occurred. (A major threshold has

been exceeded during environmental monitoring.)

SYSTEM

Orange The power supply or power supply fan failed.

Incompatible power supplies are installed.

The redundant clock failed.

One VTT

module has failed or the VTT module temperature minor

threshold has been exceeded

Red Two VTT modules failed or the VTT module temperature major

threshold has been exceeded

The temperature of the supervisor engine major threshold has been

exceeded.

Green All chassis environmental monitors are reporting OK.

ACTIVE

Orange The supervisor engine is in standby mode.

Green The supervisor engine is operational and active.

PWR MGMT

Orange Sufficient power is not available for all modules.

Green Sufficient power is available for all modules.

SWITCH LOAD

If the system is operational, the switch load meter indicates (as an

approximate percentage) the current traffic load over the backplane.

PCMCIA

The PCMCIA LED is lit when no PCMCIA card is in the slot and goes

off when you insert a card.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Brak uwag

Cisco OSM-12CT3/T1 - Optical Services Module Multiplexor Przewodnik Instalacji Strona 9