Cisco AS5800 Dokumentacja Pobierz pdf (Strona 29)

1-11

Cisco AS5800 Operations, Administration, Maintenance, and Provisioning Guide

DOC-7810814=

Chapter 1 Introduction

Basic Cisco AS5800 Start Up

Saving Configurations

To prevent losing the Cisco AS5800 configuration, save it to NVRAM using the following steps.

Step 1 Enter the enable command and password. You are in privileged EXEC mode when the prompt changes

5800-1#.

5800-1> enable

Password: password

5800-1#

Note Press Ctrl-Z to return to privileged EXEC mode. Any subsequent system response

message is normal and does not indicate an error.

Step 2 Execute the copy running-config startup-config command to save configuration changes to

nonvolatile random-access memory (NVRAM) so configuration data will not be lost during a system

reload, power cycle, or outage.

5800-1# copy running-config startup-config

Building configuration...

The following message and prompt appears after a successful configuration copy.

[OK]

5800-1#

Undoing a Command

To undo a command or disable a feature, enter the keyword no before the command; for example, no ip

routing.

Basic Cisco AS5800 Start Up

This section describes how to start up your Cisco AS5800 and configure it using the prompt-driven setup

script.

All Cisco AS5800 interfaces are configured by connecting a terminal station or PC to the Cisco 7206

router-shelf console port. This console port is located on the I/O controller front panel, as shown in

Figure 1-3.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 333 334

Brak uwag

Cisco AS5800 Dokumentacja Strona 29