Cisco PIX 525 Dokumentacja Pobierz pdf (Strona 398)

100

101

11-16

Cisco PIX Firewall and VPN Configuration Guide

78-15033-01

Chapter 11 Changing Feature Licenses and System Software

TFTP Download Error Codes

....<11>..<11>.<11>......<11>...

Also, tracing will show “A” and “T” for ARP and timeouts, respectively. Receipt of non-IP packets

causes the protocol number to display inside parentheses.

Ta b l e 11-2 Error Code Numeric Values

Error

Code

Description

-1 Timeout between the PIX Firewall and TFTP server.

2 The packet length as received from the Ethernet device was not big enough to be a valid

TFTP packet.

3 The received packet was not from the server specified in the server command.

4 The IP header length was not big enough to be a valid TFTP packet.

5 The IP protocol type on the received packet was not UDP, which is the underlying protocol

used by TFTP.

6 The received IP packet's destination address did not match the address specified by the

address command.

7 The UDP ports on either side of the connection did not match the expected values. This

means either the local port was not the previously selected port, or the foreign port was not

the TFTP port, or both.

8 The UDP checksum calculation on the packet failed.

9 An unexpected TFTP code occurred.

10 A TFTP transfer error occurred.

-10 The image filename you specified cannot be found. Check the spelling of the filename and

that permissions permit the TFTP server to access the file. In UNIX, the file needs to be

world readable.

11 A TFTP packet was received out of sequence.

Error codes 9 and 10 cause the download to stop.

1 2 ... 393 394 395 396 397 398 399 400 401 402 403 ... 465 466

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco PIX 525 Dokumentacja Strona 398

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Cisco PIX 525