Cisco WS-SVC-IPSEC-1= - IPSec VPN Services Module Informacje Techniczne Pobierz pdf (Strona 90)

IPSec VPN Acceleration Services Module Installation and Configuration Note

78-14459-03 Rev C0

Configuration Examples

line con 0

line vty 0 4

transport input lat pad mop telnet rlogin udptn nasi ssh

end

QoS

These sections provide configuration examples for QoS:

• Switch 1 Configuration, page 94

• Switch 2 Configuration, page 96

A summary of the switch configuration that is used in the examples is as follows (see Figure 16):

• The VPN module is in slot 3 on both switches.

• An IPSec tunnel that is between switch 1 and switch 2 encrypts all traffic.

• Both switches are configured so that IP packets with ToS 5 or ToS 7 go to high priority.

• To highlight the QoS configuration steps in the configuration examples, three exclamation points

(!!!) precede each QoS-related command.

Figure 16 Conﬁguring QoS Example

Switch 1 Configuration

The switch 1 configuration is as follows:

version 12.2

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

service compress-config

hostname Switch 1

boot system bootflash:c6k222-jk9sv-mz

logging snmp-authfail

ip subnet-zero

no ip domain-lookup

ip host tftp 223.255.254.254

mpls ldp logging neighbor-changes

mls flow ip destination

mls flow ipx destination

12.0.0.0/8 1/1

Switch 1

1/2 4/1

Switch 2

4/16

13.0.0.0/8

192.0.0.0/24

(LAN side) (LAN side)

(WAN side)

94101

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 96 97 98

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco WS-SVC-IPSEC-1= - IPSec VPN Services Module Informacje Techniczne Strona 90

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cisco WS-SVC-IPSEC-1= - IPSec VPN Services Module