Cisco Unified Videoconferencing Manager Instrukcja Użytkownika Strona 55
- Strona / 117
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Polycom Unified Communications for Cisco Unified Communications Manager Environments
48 Polycom, Inc.
Task 1: Configure the RMX System for Telepresence Conferencing
Be sure you have configured your RMX system to support telepresence
conferencing.
Please see the RMX System Administrator’s Guide for detailed instructions on
setting up your RMX system for telepresence conferencing.
Task 2: Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag
The MIN_TIP_COMPATIBILITY_LINE_RATE System Flag determines the
minimum line rate at which an Entry Queue or Meeting Room can be TIP
enabled.
Polycom systems support TIP version 7 which requires a minimum line rate of
1024 kbps and will reject calls at lower line rates, therefore the System Flag
value must be 1024 or higher.
For more information see the RMX Administrator’s Guide, “System
Configuration”.
Task 3: Configure a TIP Enabled Profile on the RMX system
When you need to support TIP calls, you must ensure that the conference
profiles for the RMX Entry Queues and Meeting Rooms are enabled for TIP
support. (Different profiles can be assigned to Entry Queues and Meeting
Rooms, however they must be TIP enabled.
When you enable TIP, content sharing capabilities are affected for TIP calls.
See “Content Sharing in Telepresence Environments” on page 33.
1 Create a New Profile for the Meeting Room. For more information see the
RMX Administrator’s Guide, “Defining Profiles”.
2 In the New Profile - General tab, set the Line Rate to a value of at least
that specified for the
MIN_TIP_COMPATIBILITY_LINE_RATE System
Flag
.
3 Click the Advanced tab.
4 Select the TIP Compatibility mode. The TIP Compatibility mode affects
in the user Video and Content experience as described in Table 1-4.
5 Click the Video Quality tab. The Content Settings check box is disabled if
TIP Compatibility is set to Video and Content in the Advanced tab.
6 Click the Video Settings tab. If the TIP Compatibility Mode was set to
Video and Content, the Send Content to Legacy Endpoints is disabled.
This setting cannot be changed.
7 Set the Telepresence Mode to Auto.
8 Assign the New Profile to the Meeting Room. For more information see
the RMX Administrator’s Guide, “Creating a New Meeting Room”.
- Deployment Guide for Cisco 1
- Environments 1
- Contents 3
- Contents 6
- Polycom, Inc. iii 6
- About This Guide 8
- 2 Polycom, Inc 9
- Supported Deployment Models 10
- 4 Polycom, Inc 11
- Polycom, Inc. 5 12
- 6 Polycom, Inc 13
- Communications Manager 14
- Deployment Architecture 16
- Device Licensing 16
- 10 Polycom, Inc 17
- 12 Polycom, Inc 19
- 6 Click the Save button 20
- 14 Polycom, Inc 21
- Task 3: Add a Device Entry 22
- 16 Polycom, Inc 23
- Polycom, Inc. 17 24
- 18 Polycom, Inc 25
- 20 Polycom, Inc 27
- 22 Polycom, Inc 29
- 24 Polycom, Inc 31
- 8 Click Save 32
- 26 Polycom, Inc 33
- Polycom, Inc. 27 34
- 28 Polycom, Inc 35
- Deployment Model Advantages 36
- 32 Polycom, Inc 39
- Polycom, Inc. 35 42
- 36 Polycom, Inc 43
- Task 2: Add a System User 44
- 38 Polycom, Inc 45
- Polycom, Inc. 39 46
- Polycom, Inc. 41 48
- 42 Polycom, Inc 49
- Polycom, Inc. 43 50
- 4 Click Update 52
- 46 Polycom, Inc 53
- Polycom, Inc. 47 54
- 48 Polycom, Inc 55
- Polycom, Inc. 49 56
- 50 Polycom, Inc 57
- Cisco Environment 58
- 54 Polycom, Inc 61
- 56 Polycom, Inc 63
- Polycom, Inc. 57 64
- 58 Polycom, Inc 65
- Polycom, Inc. 59 66
- 60 Polycom, Inc 67
- Polycom, Inc. 61 68
- 62 Polycom, Inc 69
- 6 Click OK 70
- 64 Polycom, Inc 71
- CMA Gatekeepers 72
- 70 Polycom, Inc 77
- Polycom, Inc. 71 78
- 72 Polycom, Inc 79
- Polycom, Inc. 73 80
- 74 Polycom, Inc 81
- Polycom, Inc. 75 82
- Task 2: Add a site link 83
- Polycom, Inc. 77 84
- Task 4: Add a Dial Rule 85
- Polycom, Inc. 79 86
- 80 Polycom, Inc 87
- Polycom, Inc. 83 90
- 84 Polycom, Inc 91
- Polycom, Inc. 85 92
- 86 Polycom, Inc 93
- 92 Polycom, Inc 99
- Polycom, Inc. 93 100
- 94 Polycom, Inc 101
- Polycom, Inc. 95 102
- 96 Polycom, Inc 103
- Using a Standalone Cisco IOS 104
- Gatekeeper 104
- Supported Products 105
- Architecture Diagram 106
- Design Considerations 106
- Task Overview 107
- Polycom, Inc. 101 108
- 102 Polycom, Inc 109
- Task 1: Define a gatekeeper 110
- Task 2: Create a trunk 111
- Polycom, Inc. 105 112
- 106 Polycom, Inc 113
- Polycom, Inc. 107 114
- 108 Polycom, Inc 115
- Polycom, Inc. 109 116
- 110 Polycom, Inc 117
Powiązane produkty i podręczniki dla Networking Cisco Unified Videoconferencing Manager
Networking Cisco OL-4015-08 Instrukcja Użytkownika
(678 strony)
(678 strony)
Networking Cisco 1710 Przewodnik Instalacji
(20 strony)
(20 strony)
Networking Cisco WS-C3020 Instrukcja Użytkownika
(12 strony)
(12 strony)
Networking Cisco 4430 Instrukcja Użytkownika
(12 strony)
(12 strony)
Networking Cisco EPC2203 Instrukcja Użytkownika
(10 strony)
(10 strony)
Networking Cisco Catalyst 4224 Dokumentacja
(310 strony)
(310 strony)
Networking Cisco RV180 Instrukcja Konfiguracji
(15 strony)
(15 strony)
Networking Cisco 7505 Instrukcja Użytkownika
(16 strony)
(16 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji