
Direct Registration of Polycom Telepresence Systems with the Cisco Unified Communications Manager
Polycom, Inc. 47
Configuring the Polycom RMX System to Support TIP Calls
If your environment includes a Polycom RMX system, you can configure it to
support telepresence calls that include Cisco telepresence endpoints.
Depending on your environment, you can choose to route calls differently.
Specifically, if your deployment includes a Polycom DMA system, you do not
need to configure your RMX system to route calls to the Cisco Unified
Communications Manager.
Configure Call Routing with the Polycom RMX System
If your deployment does not include a DMA system, you need to configure the
RMX system to route calls to the Cisco Unified Communications Manager in
order to support outgoing calls to Cisco endpoints.
See “Configuring the Polycom RMX System to Route Calls to the Cisco Unified
Communications Manager” on page 27.
Configure Call Routing with the Polycom DMA System
If your deployment includes a Polycom DMA system, you can configure the
DMA system as a SIP peer to the Cisco Unified Communications Manager to
ensure that incoming SIP/TIP calls can be routed to the RMX system.
When you use a DMA system, you can also configure the DMA system to
route calls to the Cisco Unified Communications Manager.
See “Using a Polycom DMA System in a Cisco Environment” on page 51.
Configuring the RMX System for a Cisco Telepresence Environment
You need to configure your RMX system to support telepresence calls that
include Cisco telepresence endpoints.
Perform the following tasks:
• “Configure the RMX System for Telepresence Conferencing” on page 48
• “Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag ” on
page 48
• “Configure a TIP Enabled Profile on the RMX system” on page 48
• “Configure an Ad Hoc Entry Queue on the RMX (if DMA system is not
used) ” on page 49
• “Configure a Meeting Room on the RMX” on page 49
• “Configure Participant Properties for dial out calls ” on page 49
• “Configure the RMX system for your H.323 gatekeeper” on page 49
Komentarze do niniejszej Instrukcji