Cisco 2811-AC-IP - 2811 Integrated Services Router Instrukcja Użytkownika Pobierz pdf (Strona 7)

JC; Reviewed:

SPOC 9/25/2007

Solution & Interoperability Test Lab Application Notes

7 of 8

Cisco2811-POE

6. Verification Steps

The following commands can be used verify the proper operation of the Cisco 2811 Integrated

Services Router.

• Connect the Avaya IP Telephones, Avaya Quick Edition IP Telephones and the Avaya

G10 PSTN Gateway to Cisco 2811 Integrated Services Router. Verify the Avaya IP

Telephones can be powered properly.

• Verify that the Avaya IP Telephones can register with Avaya Communication Manager

and calls can be made successfully.

• Use the command show power inline to check the power status of the EtherSwitch

Service Module ports. Verify the power mode is set to auto.

• Reset the router and verify the Avaya IP telephones can be powered up properly.

7. Conclusion

These Application Notes described configuration of the Cisco 2811 Integrated Services Router to

provide power over Ethernet to the Avaya IP Telephones, and the Avaya Quick Edition G10

PSTN Gateway. The Cisco 2811 was able to power all devices tested.

8. Additional References

The Avaya product documentation is available at http://support.avaya.com.

[1] Administrator Guide for Avaya Communication Manager, Release 4.0, Issue 3, February

2007, Document Number 03-300509.

Cisco documentation is available from the Cisco website.

1 2 3 4 5 6 7 8

Brak uwag

Cisco 2811-AC-IP - 2811 Integrated Services Router Instrukcja Użytkownika Strona 7