Cisco 2811-AC-IP - 2811 Integrated Services Router Instrukcja Użytkownika Pobierz pdf (Strona 5)

JC; Reviewed:

SPOC 9/25/2007

Solution & Interoperability Test Lab Application Notes

5 of 8

Cisco2811-POE

1616 with BM32 3 15.4 Watts

Quick Edition 4610 2 7.0 Watts

Quick Edition 4621 2 7.0 Watts

Quick Edition G10 0 15.4 Watts

Table 2 – Class and Power Allocation for Avaya IP Telephones

5. Configuring Inline Power on the Cisco 2811 Integrated

Services Router

The Cisco 2811 Integrated Services Router installed with a NME-16ES-1G-P EtherSwitch

Service Module and Cisco 2811 AC inline power supply (PWR-2811-AC-IP) supports 160 Watts

of inline power, which is enough to support Class 2 and some Class 3 PDs on all 16 ports. The

testing associated with these Application Notes did not cover loading of all ports on the PSE.

The ports connecting to the Avaya IP Telephones must be set to the default auto mode in order

to receive power from the router.

To access the router, connect the console cable to the PC’s serial port with the other end

connected to the router’s console port located at the front of the router. Use HyperTerminal to

access the console.

Assign an IP address to the interface associated with the EtherSwitch Service Module and then

open a session to it.

routername#config t

routername#interface gigabitEthernet 1/0

routername#ip address 10.1.20.15 255.255.255.0

routername#no shut

routername#service-module gigabitethernet 1/0 session

1 2 3 4 5 6 7 8

Brak uwag

Cisco 2811-AC-IP - 2811 Integrated Services Router Instrukcja Użytkownika Strona 5