Cisco 1750 - 1750 Router Instrukcja Użytkownika Pobierz pdf (Strona 4)

Voice Software Enhancements for the Cisco 1750 and Cisco 1751 Routers

OL-1671-01

Supported Features

Configuring Caller ID

After configuring the voice port, follow these steps to configure Caller ID on FXS and FXO voice ports:

Step 9

Router(config-voiceport)# ring

frequency {25 | 50}

(Optional. FXS ports only.) Select the appropriate ring frequency (in

Hertz) specific to the equipment attached to this voice port.

Step 10

Router(config-voiceport)# Caller ID

attenuation attenuation

(Optional. FXS ports only.) To specify an attenuation other than the

default of 14 dB (-14 dBm), enter a value of from 0 to 64, in decibels.

Step 11

Router(config-voiceport)# ring

number number

(Optional. FXS ports only.) Specify the maximum number of rings to be

detected before answering a call.

Command Purpose

Step 1

Router(config-voiceport)# Caller ID

enable

This command applies to FXS voice ports that send Caller ID

information and to FXO ports that receive it.

By default Caller ID is disabled.

Note If the station name, station number,oraCaller ID alerting

command is configured on the voice port, these automatically

enable Caller ID, and the Caller ID enable command is not

necessary.

Step 2

Router(config-voiceport)# station

name

Configure the station name on FXS voice ports connected to user

telephone sets. This sets the Caller ID information for on-net calls

originated by the FXS port. You can also configure the station name on

an FXO port of a router for which incoming Caller ID from the PSTN

subscriber line is expected. In this case, if no Caller ID information is

included on the incoming PSTN call, the call recipient receives the

information configured on the FXO port instead. If the PSTN

subscriber line does provide Caller ID information, this information is

used and the configured station name is ignored.

The name is a character string of 1 to 15 characters identifying the

station.

Note This command applies only to Caller ID calls, not to

Automatic Number Identification (ANI) calls. ANI supplies

calling number identification only.

1 2 3 4 5 6 7 8 9 ... 13 14

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco 1750 - 1750 Router Instrukcja Użytkownika Strona 4

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cisco 1750 - 1750 Router