Cisco IE 2000 Dokumentacja Pobierz pdf (Strona 128)

8-8

System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches

Chapter 8 Configuring LLDP and LLDP-MED

Configuring LLDP and LLDP-MED

Disabling a TLV

BEFORE YOU BEGIN

Review the “Information About LLDP and LLDP-MED” section on page 8-1.

DETAILED STEPS

EXAMPLE

This example shows how to disable a TLV:

Switch# configure terminal

Switch(config)# interface GigabitEthernet1/0/1

Switch(config-if)# no lldp med-tlv-select inventory-management

Switch(config-if)# end

Enabling a TLV

BEFORE YOU BEGIN

Review the “Information About LLDP and LLDP-MED” section on page 8-1.

DETAILED STEPS

network-policy LLDP-MED network policy TLV

power-management LLDP-MED power management TLV

Table 8-1 LLDP-MED TLVs (continued)

LLDP-MED TLV Description

Command Purpose

Step 1

configure terminal Enter global configuration mode.

Step 2

interface interface-id Specify the interface on which you are configuring a

LLDP-MED TLV, and enter interface configuration mode.

Step 3

no lldp med-tlv-select tlv Specify the TLV to disable.

Step 4

end Return to privileged EXEC mode.

Step 5

copy running-config startup-config (Optional) Save your entries in the configuration file.

Command Purpose

Step 1

configure terminal Enter global configuration mode.

Step 2

interface interface-id Specify the interface on which you are configuring an

LLDP-MED TLV, and enter interface configuration mode.

Step 3

lldp med-tlv-select tlv Specify the TLV to enable.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 335 336

Brak uwag

Cisco IE 2000 Dokumentacja Strona 128