crashinfo files that you can delete or old images that are not in use. Issue the write memory
command in order to free up space so that you can write the configuration into memory.
Q. I use Aironet Client Utility (ACU) 6.3 and Cisco 1200 Access Points
(APs) that run Cisco IOS Software Release 12.3(8)JA. When the wireless
client is associated to the AP, the AP name is not displayed on the ACU.
Why?
A. AP Name is the hostname for the AP. If Aironet extensions are enabled on the AP, then
the AP name is displayed on the ACU.
If you do not wish to see the AP name, you can disable Cisco Aironet extensions to the IEEE
802.11b standard (no dot11 extensions aironet under the radio interface). Cisco Aironet
extensions are enabled by default in the AP.
If previously disabled, you can enable Cisco Aironet extensions with this command:
AP(config−if)#dot11 extension aironet
In a beacon, the AP includes an information element that is Cisco−proprietary that contains
the AP name. If you turn off Aironet extensions on the AP, the AP does not beacon its name.
Refer to Disabling and Enabling Aironet Extensions for more information on Aironet
extensions.
Q. My access point (AP) accepts and connects to only one client at a
time. What could be the reason?
A. One possible reason could be that the max−associations parameter is set to 1 under the
service−set identifier (SSID) configuration. Use the max−associations SSID configuration
mode command in order to configure the maximum number of associations supported by the
radio interface (for the specified SSID). Use the no form of the command in order to reset the
parameter to the default value. This default maximum is 255.
Q. How can you recover forgotten passwords?
A. Refer to Password Recovery Procedure for the Cisco Aironet Equipment.
Q. Serial numbers do not show up on any of the BR350 or AP350s we
have by commands. These are VxWorks and have not been converted to
IOS. How do I retrieve this information from the devices?
A. The 350 Series APs and Bridges that run VxWorks do not display the serial number in
software. The only way to identify the serial number on these units is to physically inspect the
label on the hardware itself.
Q. What are possible sources of interference for the radio frequency (RF)
link of the AP?
A. Interference can come from a number of sources, such as:
2.4 GHz cordless phones♦
(100 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji