Cisco UCS B22 M3 Instrukcja Naprawy Pobierz pdf (Strona 13)

Send document comments to ucs-docfeedbac[email protected]

Cisco UCS B22 Blade Server Installation and Service Note

OL-27513 -01

Removing and Installing a UCS B22 Blade Server

Step 3 Slide the blade part of the way out of the chassis, and place your other hand under the blade to support

its weight.

Step 4 Once removed, place the blade on an antistatic mat or antistatic foam if you are not immediately

reinstalling it into another slot.

Step 5 If the slot is to remain empty, install a blank faceplate (N20-CBLKB1) to keep dust out of the chassis.

Installing a Cisco UCS B22 Blade Server

Figure 5 shows the positioning of a blade server in the chassis. Blade servers reside within the eight

upper slots of the chassis. To install a blade server, follow these steps:

Step 1 Grasp the front of the blade server and place your other hand under the blade to support it. See Figure 5.

Figure 5 Positioning a Blade Server in the Chassis

Step 2

Open the ejector lever in the front of the blade server.

Step 3 Gently slide the blade into the opening until you cannot push it any farther.

331364

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Brak uwag

Cisco UCS B22 M3 Instrukcja Naprawy Strona 13