Cisco 2500 SERIES Dokumentacja Pobierz pdf (Strona 19)

Step 6 For configuration instructions about using the CLI setup program, see the “Running the

Bootup Script and Power-On Self Test” section on page 24.

Mounting the Controller in a Rack

To mount the 2504 controller in a 19-inch equipment rack, you can order an optional Optional Rack

Mount kit (AIR-CT2504-RMNT).

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take

special precautions to ensure that the system remains stable. The following guidelines

are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the

top with the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting

or servicing the unit in the rack.

Statement 1006

To install the controller in a rack, follow these steps.

Step 1 Attach the 19-inch brackets to each side of the controller as shown in Figure 9 with #10-32

flat head screws provided in the kit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Brak uwag

Cisco 2500 SERIES Dokumentacja Strona 19