Cisco ATM and Layer 3 Switch Router OL-1911-05 Instrukcja Użytkownika Pobierz pdf (Strona 26)

24-26

ATM and Layer 3 Switch Router Software Configuration Guide

OL-1911-05

Chapter 24 Configuring ATM Router Module Interfaces

Configuring Bridging

Example

In the following example only PVC 2, 200 is used for packet flooding:

Switch(config)# interface atm 3/0/0

Switch(config-if)# no ip address

Switch(config-if)# no ip directed-broadcast

Switch(config-if)# map-group /jointfilesconvert/1206845/bg_1

Switch(config-if)# atm pvc 2 200 interface atm 1/0/1 0 200

Switch(config-if)# atm pvc 2 201 interface atm 1/0/1 0 300

Switch(config-if)# bridge-group 5

Switch(config-if)# end

Switch(config)# map-list /jointfilesconvert/1206845/bg_1

Switch(config-map-list)# bridge atm-vc 200 broadcast

Note For more information about bridging, refer to the Layer 3 Software Configuration Guide.

Displaying the Bridging Configuration

To display the bridging configuration on the ATM router module interface, use the following privileged

EXEC command:

Example

Switch# show bridge verbose

Total of 300 station blocks, 297 free

Codes: P - permanent, S - self

BG Hash Address Action Interface VC Age RX count TX count

5 28/0 0000.0ce4.341c forward Fa0/0/0 -

5 2A/0 0000.0cac.be94 forward ATM3/0/0 200

5 FA/0 0060.3e59.c63c forward Fa0/0/0 -

Command Purpose

show bridge verbose Displays the entries in the bridge forwarding

database.

1 2 ... 21 22 23 24 25 26 27 28 29 30

Brak uwag

Cisco ATM and Layer 3 Switch Router OL-1911-05 Instrukcja Użytkownika Strona 26