Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Przewodnik Instalacji Pobierz pdf (Strona 56)

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(6)

OL-27554-01

Caveats

Condition: This issue applies to the following NX-OS versions or platform combinations only:

–

The Cisco MDS switches running MDS NX-OS Release 5.2(6), 5.2(6a), 5.2(6b), 5.2(8), 5.2(8a),

or 6.2(1).

–

The Cisco Nexus 7000 switches running NX-OS version 6.1(3) or 6.1(4).

In addition, the following conditions must be true:

–

Device-alias is set to enhanced mode by using the device-alias mode enhanced command.

–

Multiple commands are performed on the same device-alias before a commit and one of which

is the rename command.

Note This issue occurs in both zone mode basic and zone mode enhanced.

Workaround: To avoided this issue group the device-alias commands of the same type together and

commit the changes before starting the next type. For example, use the device-alias commit

command after each and every same type of device-alias action. See the examples below.

Example 1

The following example shows how to delete the Alias2 and rename Alias1 to Alias2:

device-alias rename Alias1 temp_Alias1

device-alias rename Alias2 temp_Alias2

device-alias commit

Use the show device-alias session status command to verify the device-alias session status.

device-alias rename temp_Alias1 Alias2

device-alias commit

Use the show device-alias session status command to verify the device-alias session status.

If you do not need temp_Alias2, use following commands:

device-alias delete temp_Alias2

device-alias commit

The following example shows how to delete the Alias2 and rename Alias1 to Alias2:

Example 2

device-alias delete Alias2

device-alias commit

Use the show device-alias session status command to verify the device-alias session status.

device-alias rename Alias1 Alias2

device-alias commit

Use the show device-alias session status command to verify the device-alias session status.

Note You can use multiple device-alias commands of the same type such as delete, rename, and add in the

same batch if the names of all the device-alias that areaffected are unique.

• CSCub51064

Symptom: An ISSU from Cisco MDS Release 4.2(7dE5) to Release 5.2(6) fails when the number

of IOA tape acceleration flows exceeds 511.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Przewodnik Instalacji Strona 56

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Procesory Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor