Cisco WS-X6416-GE-MT - Interface Module - Expansion Instrukcja Użytkownika Strona 11

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 51
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 10
White Paper
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 51
Figure 4. Partial Output from Cisco Catalyst OS show version console Command
Cisco IOS Software
Figure 5 show the partial output of a show version console command in Cisco IOS Software, from
either native Cisco IOS Software or hybrid Cisco IOS Software running on the MSFC or route
processor. This example is typical from a Cisco Catalyst 6500 Series Supervisor Engine 720-3B
configured with 512 MB of system memory.
Figure 5. Partial Output from a Cisco IOS Software show version console Command
Flash Memory
The native Cisco IOS Software model and hybrid software model have different requirements for
flash memory. This is primarily because of the location of the software image files and also the
combined Layer 2 and Layer 3 nature of the native Cisco IOS Software image file. Because the
Cisco IOS Software images are combined Layer 2 and Layer 3 images, they are larger than Cisco
Catalyst OS images. For example, a Cisco Catalyst OS release from the 8.5 software train might
be 24 MB, whereas a full featured native Cisco IOS Software release in 12.2SXF could be 90 MB
or larger.
When migrating from a Cisco Catalyst OS or a hybrid software model to a native Cisco IOS
Software model, one must verify that the supervisor flash memory capacity is large enough to
store the native Cisco IOS Software image file.
If the onboard flash memory of the switch processor is not large enough to store the software
image file, then the removable media storage options must be used. For instance, the Cisco
Catalyst 6500 Series Supervisor Engine 2 provides a PCMCIA slot, and the Cisco Catalyst 6500
Series Supervisor Engine 720 and Cisco Catalyst 6500 Supervisor Engine 32 provide
CompactFlash slots. Another option for Cisco Catalyst 6500 Series Supervisor Engine 720
deployments would be to upgrade the onboard flash using the CompactFlash adapter. With some
exceptions, Cisco Catalyst 6500 Series Supervisor Engine 720 units shipped after May 5, 2006 or
ordered with a native Cisco IOS Software Release 12.2(18)SXE5 or newer ship with 512 MB of
onboard switch processor flash memory. The exceptions to this are Cisco Catalyst 6500 Series
Supervisor Engine 720 units ordered with any Cisco Catalyst OS software release or a native
Przeglądanie stron 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

Komentarze do niniejszej Instrukcji

Brak uwag