12
Release Notes for the 4-MB Catalyst 2900 Series XL Cisco IOS Release 11.2(8.6)SA6
OL-0332-02
Current Caveats
Step 22 Reload the new software with the following command:
switch# reload
System configuration has been modified. Save? [yes/no]: y
Proceed with reload? [confirm]
Step 23 Press Return to confirm the reload.
Your Telnet session ends when the switch resets.
Step 24 After the switch reboots, you can use Telnet to go back into the switch and enter the show version
command in privileged EXEC mode to verify the upgrade procedure.
Current Caveats
This section describes possible unexpected activity by IOS Release 11.2(8.6)SA6.
• When you try to access a switch by entering the IP address in the location field while using CVSM,
the switch displays the Cisco Access page for the new switch. However, you cannot access CVSM
for the new switch from this page. The switch refreshes the Cisco Access page without displaying
the switch home page.
The workaround is to start a new browser session and enter the IP address of the new switch in the
Location field of the new browser session. (CSCdm27401)
• If you use Telnet or a browser to access a member switch without an IP address from the CVSM
CDP page, the switch starts a session with the command switch.
The workaround for Telnet is to first display the cluster-member number by entering the privileged
EXEC command show cluster member. Note the number of the member you want to access, and
then Telnet to the switch by entering the following command: rcommand switch_number.
The workaround for the browser is to start Cluster Management from the switch home page and
start Cluster Manager. Right-click on the chassis of the switch that you want to access, and select
Switch Manager. (CSCdm34868)
• The Device Report and Bandwidth Graph menu items for candidate switches without IP addresses
do not work.
The workaround is to add candidates to the cluster and then right-click the device and select Device
Report or Bandwidth Graph from the pop-up menu. (CSCdm31724)
• The Link Graph between members and non-members does not work.
The workaround is to display the Device Report for the member switch, select Port Information
from the drop-down menu in the right corner of the page, and click the appropriate port. Click
Graph. (CSCdm32226)
• Device reports and graphs give “SNMP Unavailable” messages.
First make sure that the switch is reachable via the network and that the SNMP agent is enabled.
Also verify that you are using the correct community string. There should be only one read-only
SNMP community string. If you change the community string while using cluster manager or
CVSM, you must reload your browser to display the changes. (CSCdm32367)
• Links between members sometimes do not display in Cluster Builder or Cluster View.
The workaround is to display the Device Links Report from the Cluster Builder window.
(CSCdm27668)
(4 strony)
(38 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji