Cisco SCE 2000 4xGBE Dokumentacja Pobierz pdf (Strona 335)

100

101

2-299

Cisco SCE 2000 and SCE 1000 CLI Command Reference

OL-26797-03

Chapter 2 CLI Command Reference

setup

• Domain Name Server configuration: default domain name and IP address (up to 3)

• RDR-formatter destination: IP address and TCP port number

• Access Control Lists: up to 100 lists, with 20 IP addresses in each list, each entry can be designated

as permitted or denied.

Create ACLs for IP access, Telnet access, SNMP GET community access, and SNMP SET

community access as needed:

• SNMP configuration: Define the following:

–

GET community names (up to 20)

–

SET community names (up to 20)

–

trap managers (up to 20): IP address, community string, version

–

name of system manager

• Topology configuration: Define the following:

–

connection mode

–

administrative status after abnormal reboot

–

SCE 1000 Platform:

–

link-bypass mode when operational

–

redundancy

–

link-bypass mode when not operational

–

SCE 2000 Platform:

–

deployment type

–

physically-connected-link index

–

priority

–

on-failure link behavior

For a complete description of the command, see the Cisco SCE 2000 4xGBE Installation and

Configuration Guide.

Authorization: admin

Examples The following example runs the setup utility.

SCE>enable 10

Password:<cisco>

SCE#setup 

--- System Configuration Dialog ---

At any point you may enter a question mark ‘?’ followed by ‘Enter’ for help.

Use ctrl-C to abort configuration dialog at any prompt.

Use ctrl-Z to jump to the end of the configuration dialog at any prompt.

Default settings are in square brackets ‘[]’.

Would you like to continue with the System Configuration Dialog? [yes/no]: y

1 2 ... 330 331 332 333 334 335 336 337 338 339 340 ... 603 604

Komentarze do niniejszej Instrukcji

Brak uwag

Cisco SCE 2000 4xGBE Dokumentacja Strona 335

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Cisco SCE 2000 4xGBE