Cisco H.323/SIP Informacje Techniczne Pobierz pdf (Strona 62)

Polycom® Unified Communications Deployment Guide for Cisco Environments

Task 1: Configuring a SIP Peer

The following steps will configure the DMA System with a SIP Peer for CUCM.

To configure a SIP peer:

1 Log into the DMA System.

2 Navigate to Network > External SIP Peer.

3 In the Actions menu, click Add.

4 Click on the External SIP Peer tab.

a Type a name and description for the SIP Peer.

b Ensure that the Enabled check box is selected.

c In the Next hop address field, type the IP Address or DNS-resolvable name of the

primary call processing CUCM node.

d In the Port field, enter the SIP port to use. The default port is 5060.

e (Optional) In the Prefix Range field, enter the prefix associated with the CUCM.

Associating a prefix with your CUCM depends on how you have set up dial plans and

rules within your DMA system. For detailed information, see the Polycom DMA System

Operations Guide.

Note: Prefix Range and Redundant Integrations

For redundant integrations, do not configure a Prefix Range directly on the DMA SIP

Peer.

f In the Type drop-down list, select Other.

g In the Transport Type drop-down list, select either TCP or UDP. This is dependant on

the settings of the CUCM SIP Trunk Security Profile configuration associated with the

CUCM SIP Trunk.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 94 95

Brak uwag

Cisco H.323/SIP Informacje Techniczne Strona 62