Cisco Ethernet switch Instrukcje Operacyjne Pobierz pdf (Strona 249)

Appendix A. Hints and tips 235

The option for

Fast POST in the Management Module Advanced Setup for I/O Modules only

affects how thoroughly the diagnostics are run during POST, which in turn affects how fast the

switch boots but does not ultimately affect any management or data paths on the IGESM.

Figure 9-2 Advanced settings for each IGESM (on the Management Module)

These are ways that one can detect Management Module settings from commands and

actions performed on the Cisco Systems IGESM:

򐂰 How can I tell whether the External ports setting is set to Enabled or Disabled?

If you attempt to go into one of the external interfaces and perform no shut on the IGESM,

and it returns a Shutdown is not allowed on this interface message, then the setting

on the Management Module is Disabled (Figure 9-3). To permit a no shut to work on ports

17 through 20, you must go into the Management Module and set this value to Enabled.

Figure 9-3 Detecting the setting of external ports on the Management Module

򐂰 How can I tell how External management over all ports and Preserve new IP configuration

on all resets are set?

See Figure 9-4 on page 236. Use the sh platform summary command to see these

values. To change any of these values, you must log on to the Management Module and

make the appropriate change therein.

• Unable to enable external ports from switch

switch(config)#int g0/17

switch(config-if)#no shut

% Shutdown not allowed on this interface.

• Must enable External ports in advanced setup in MM

• Default is Disabled

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 265 266

Brak uwag

Modelle	Dokumententyp
TEMPEST 2400	Bedienungsanleitung Clear-Com_Tempest - John S. Hyatt & Associates, Inc., 16 Seiten Bedienungsanleitung Clear Com Tempest 2400 CP-242 brochure, 8 Seiten Spezifikationen Clear-Com TEMPEST 2400 Specifications, 100 Seiten
Tempest2400	Bedienungsanleitung Tempest®2400 - AV, 12 Seiten

Cisco Ethernet switch Instrukcje Operacyjne Strona 249