Cisco Dial NMS Instrukcja Użytkownika Pobierz pdf (Strona 3)

Configuration Tasks

Call Detail Records (CDR) MOD-3

Conﬁguration Tasks

To conﬁgure the Cisco MC3810 to compile CDR events, perform the following tasks beginning in

global conﬁguration mode:

Note The CDR event output is not meaningful until after dial peers for Voice over Frame Relay,

Voice over ATM, or Voice over HDLC are conﬁgured.

Step Command Purpose

dial-control-mib {max-size number |

retain-timer number}

Conﬁgure the Cisco MC3810 to compile CDR events.

The max-size value speciﬁes the maximum size of the

CDR event table. The valid range is from 0–1200, and the

default is 50. The value 0 disables the CDR feature,

meaning no call history is compiled.

The retain-timer value speciﬁes the length of time in

minutes that entries will remain in the call history table.

The valid range is from 0–2147483647 minutes, and the

default is 15. Setting the value to 0 prevents any call

history from being retained.

Note It is recommended that both values be set high

enough for the NMS to successfully poll the CDR events,

and to access the events in the call history table.

exit Exit conﬁguration mode.

show call history voice record As an alternative to viewing CDR events via the NMS,

display portions of the call history table showing the CDR

events. The display only shows a snapshot of the events

currently stored in the call history table buffer.

Some call history records may show an empty string for

the calling number. This may be caused by certain

conﬁgurations, but does not necessarily indicate a problem

with the call.

1 2 3 4 5 6 7 8

Brak uwag

Cisco Dial NMS Instrukcja Użytkownika Strona 3