Cisco CTX2500 Informacje Techniczne Pobierz pdf (Strona 18)

RTRV-ALM-ALL

Use the RTRV-ALM-ALL command to retrieve all of the alarms on the system. RTRV-ALM-ALL is

from the Fault category.

Input Format:

RTRV-ALM-ALL:[<TID>]:[<AID>]:<CTAG>::[<NTFCNCDE>],[<CONDITION>],[<SRVEFF>][,,,];

• TID is the name of the node you want to access. If you only want to query the node you connected

to leave the TID blank.

• AID is the access identifier ALL.

• CTAG is any non-blank character series that does not have to be unique.

• NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major),

MN (minor), NA (not alarmed), and NR (not reported).

• CONDITION is the type of alarm condition.

• SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service

affecting) or SA (service affecting).

Input Example:

RTRV-ALM-ALL:COTATI:ALL:229::MN,PWRRESTART,NSA;

Response Format:

SID DATE TIME

M CTAG COMPLD

“[<AID>],[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,<OCRDAT>,

<OCRTM>,,:[<DESC>],[<AIDDET>]”

;

• AID shows the port in question.

• AIDTYPE shows the type of the port.

• NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major),

MN (minor), NA (not alarmed), and NR (not reported).

• CONDTYPE is the type of alarm condition.

• SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service

affecting) or SA (service affecting).

• OCRDAT is a date.

• OCRTM is a time.

• DESC is a condition description.

• AIDDET is the supplementary equipment identification.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Brak uwag

Cisco CTX2500 Informacje Techniczne Strona 18