Cisco AS5300 - Universal Access Server Przewodnik Instalacji Pobierz pdf (Strona 12)

Connect a Modem for Remote Administrative Access (Optional)

To configure the Cisco AS5300 from a remote location, you will need an RJ-45-to-RJ-45 rollover cable and a modem adapter

(RJ-45-to-DB-25) for connecting a modem.

If you will not be using a modem to configure the Cisco AS5300 remotely, skip this procedure and go to Connect Power, page 13.

Note The cable and adapter are included. The modem is not included.

Step 1 Connect the adapter labeled MODEM to your modem.

Step 2 Connect the RJ-45-to-RJ-45 rollover cable to the adapter.

Step 3 Connect the other end of the RJ-45-to-RJ-45 rollover cable to the port labeled AUX on the rear panel of the

Cisco AS5300.

Universal access

server

RJ-45-to-RJ-45

rollover cable

Auxiliary port

(RJ-45)

(labeled AUX)

Modem

RJ-45-to-DB-25 adapter

(labeled MODEM)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Brak uwag

Cisco AS5300 - Universal Access Server Przewodnik Instalacji Strona 12