CAT6500(config)#wism module 1 controller 1 qos-trust dscp
CAT6500(config)#port-channel load-balance src-dst-ip
CAT6500(config)#wism module 1 controller 2 allowed-vlan 11,21
CAT6500(config)#wism module 1 controller 2 qos-trust dscp
09*@U!19*!561*'/(@*!71(187!( &( 56 N!
CAT6500#show int status
Port Name Status Vlan Duplex Speed Type
Gi1/1 connected trunk full 1000 unknown (4)
Gi1/2 connected trunk full 1000 unknown (4)
Gi1/3 connected trunk full 1000 unknown (4)
Gi1/4 connected trunk full 1000 unknown (4)
Gi1/5 connected trunk full 1000 unknown (4)
Gi1/6 connected trunk full 1000 unknown (4)
Gi1/7 connected trunk full 1000 unknown (4)
Gi1/8 connected trunk full 1000 unknown (4)
Gi1/9 connected 11 full 1000 unknown (4)
Gi1/10 connected 11 full 1000 unknown (4)
CAT6500#show ip int brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet1/1 unassigned YES unset up up
GigabitEthernet1/2 unassigned YES unset up up
GigabitEthernet1/3 unassigned YES unset up up
GigabitEthernet1/4 unassigned YES unset up up
GigabitEthernet1/5 unassigned YES unset up up
GigabitEthernet1/6 unassigned YES unset up up
GigabitEthernet1/7 unassigned YES unset up up
GigabitEthernet1/8 unassigned YES unset up up
GigabitEthernet1/9 unassigned YES unset up up
GigabitEthernet1/10 unassigned YES unset up up
CAT6500#show etherchannel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use N - not in use, no aggregation
f - failed to allocate aggregator
M - not in use, no aggregation due to minimum links not met
m - not in use, port not aggregated due to minimum links not met
u - unsuitable for bundling
d - default port
w - waiting to be aggregated
Number of channel-groups in use: 2
Number of aggregators: 2
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
401 Po401(SU) - Gi1/1(P) Gi1/2(P) Gi1/3(P)
Gi1/4(P)
402 Po402(SU) - Gi1/5(P) Gi1/6(P) Gi1/7(P)
Gi1/8(P)
09*@U!5/!%56&!57!6.K!K.'U56&N!
CAT6500#ping 10.11.21.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.11.21.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
$
3#!0.6/5&8'*!=.()!<(=(6@56&!/.'!=.()!<(=(6@56&!<(7*)!.6!<*71!%'(@15@*7$
!
CAT6500(config)#port-channel load-balance src-dst-ip
$
(12 strony)
(66 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji