Cisco 820 Series Przewodnik Instalacji Pobierz pdf (Strona 8)

1-8

Cisco 820 Series and SOHO Series Router Cabling and Setup

78-13937-04

Chapter 1 Cisco 820 Series and SOHO Series Routers Cabling and Setup

Connect the Power and Turn On the Router

Caution Do not connect the router telephone ports to the telephone wall jack. These ports are not meant for direct

connection to the public network. This connection can damage your router.

Figure 1-4 Connecting a Telephone to a Cisco 827-4V Router

Connect the Power and Turn On the Router

Follow the steps in Figure 1-5 on page 1-9 to connect an AC adapter to the Cisco router and turn it on.

(Figure 1-5 shows a Cisco 827-4V router, but the process applies to all Cisco 820-series and SOHO

routers.)

Caution Be sure to use the power supply that was supplied with your Cisco router. Power supplies for other Cisco

routers will not plug in to the power receptacle on the back panel.

After you turn on the router, the OK LED on the front will turn on. After a minute or two, the xDSL CD

LED will turn on. The Ethernet LEDs for the Ethernet ports to which you have connected PCs or hubs

will turn on a minute or two after you have turned on the PCs.

ETHERNET

TO HUB

TO PC

+5,+12,-12,-24,-71 VDC

CONSOLE

Model Cisco 827-4V

ADSL

PHONE

Cisco 827-4V router

1. Connect telephone cable to

gray PHONE port 1, 2, 3, or 4.

If you are connecting only one

device, use PHONE port 1.

2. Connect other end of

cable to telephone or

fax machine.

Analog telephone

65597

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Cisco 820 Series Przewodnik Instalacji Strona 8