Cisco IOS XE Intelligent Services Dokumentacja Strona 128

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 127
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
16
Caution Changing the interface speed and duplex mode configuration might shut down and reenable the interface
during the reconfiguration.
Configuring the Interface Speed
Use the following task to set the interface speed.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface fastethernet interface-id
4. speed [10 | 100 | auto]
DETAILED STEPS
Note If you set the interface speed to auto on a 10/100-Mbps Ethernet interface, both speed and duplex are
automatically negotiated.
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface fastethernet interface-id
Example:
Router(config)# interface fastethernet 0/1/0
Selects the interface to be configured.
Step 4
speed [10 | 100 | auto ]
Example:
Router(config-if)# speed 100
Selects the interface to be configured.
Przeglądanie stron 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 301 302

Komentarze do niniejszej Instrukcji

Brak uwag