Cisco DPA 7610 Instrukcja Użytkownika Pobierz pdf (Strona 8)

DPA 7610 Known Problems and Errata

Cisco DPA 7610 Voice Mail Gateway Version 1.1(1) Release Notes

78-12814-01

Documentation Errata

The following section modifies the “Connecting to Ethernet” section on page 2-8

and the “Configuring Network Settings” section beginning on page 4-4 of

the Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide.

The DPA 7610 fully supports 10/100 Mbs half and full-duplex Ethernet. Follow

these steps to configure these settings on DPA 7610 appropriate for your network.

Step 1 From the main menu, select Configure.

Step 2 Select Network interface.

CSCdt44142 The DPA 7610 needs to be

restarted after a change to the

Ethernet speed or duplex

setting.

This is as designed.

CSCdt45372 The DPA 7610 might exhibit

problems if the Ethernet

interface is set to

auto-negotiation and the

switch is set to fixed speed or

duplex, or vice-versa.

This is not a supported configuration. The

DPA 7610 requires that both connections are either

configured to auto-negotiaton or set to the same

combination of speed and duplex.

CSCdt49576 Reprogramming the boot

loader while the DPA 7610 is

busy causes other activity on

the DPA 7610 to be suspended

or stopped.

You should only update the boot loader when the

DPA 7610 is otherwise idle.

Caution Only upgrade the boot loader if you

are instructed to do so by a Cisco

technical representative. If you

encounter difficulties during this

upgrade, such as a loss of power, the

DPA 7610 might not be able to start

up.

Table 1 DPA 7610 Known Problems (continued)

Bug ID Summary Explanation

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Brak uwag

Cisco DPA 7610 Instrukcja Użytkownika Strona 8